EFFECT OF NANO Cr2O3 ADDITION ON (Bi-Pb)-Sr-Ca-Cu-O SUPERCONDUCTOR

Authors

  • Wei Kong School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia Author
  • Roslan Abdul Shukor School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia Author

DOI:

https://doi.org/10.66514/

Abstract

The effect of nano Cr2O3 addition on (Bi,Pb)-Sr-Ca-Cu-O superconductor has been studied. The samples were prepared from the co-precipitation method in the bulk form. Both the critical temperature (Tc) and critical current density (Jc) were determined by the four point-probe technique. Phases analyses of the samples by XRD, microstructures determination by SEM and distribution of nano Cr2O3 by EDAX have been carried out. The maximum Tc and Jc were observed for 0.1 wt% nano Cr2O3 in the initial sample. The increase in the Jc of all the samples can be explained due to the effective flux pinning of nano Cr2O3 to the samples. 

Downloads

Published

23-04-2026

Issue

Vol. 15 No. 1 (2007): Solid State Science and Technology

Section

Articles

License

Copyright (c) 2007 Solid State Science and Technology

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

Kong, W., & Abdul Shukor, R. (2026). EFFECT OF NANO Cr2O3 ADDITION ON (Bi-Pb)-Sr-Ca-Cu-O SUPERCONDUCTOR. Solid State Science and Technology, 15(1), 1-5. https://doi.org/10.66514/