DIELECTRIC BEHAVIOR OF Ni0.1Zn0.9Fe2O4-POLYPROPYLENE COMPOSITES AT LOW MICROWAVE FREQUENCIES

Authors

  • Tan Foo Khoon Department of Physics, Faculty of Science, University Putra Malaysia, 43400 Serdang, Selangor Author
  • Jumiah Hassan Department of Physics, Faculty of Science, University Putra Malaysia, 43400 Serdang, Selangor Author
  • Nurhidayaty Mokhtar Department of Physics, Faculty of Science, University Putra Malaysia, 43400 Serdang, Selangor Author
  • Mansor Hashim Department of Physics, Faculty of Science, University Putra Malaysia, 43400 Serdang, Selangor Author
  • Nor Azowa Ibrahim Department of Chemistry, Faculty of Science, University Putra Malaysia, 43400 Serdang, Selangor Author

Keywords:

Nickel-zinc ferrite, solid-state, polypropylene, dielectric properties

Abstract

In the last decade, studies and research toward polymer-clay composites draw significant attention for a suitable filler that can improve mechanical, thermal, electrical, optical and pharmaceutical properties as compared with pure polymer. Ni0.1Zn0.9Fe2O4 (NZF) was prepared using conventional solid-state method. A two phase composite was fabricated with blend filled Ni0.1Zn0.9Fe2O4 added to isotactic polypropylene matrix. The samples were characterized by XRD and dielectric measurements were done using Agilent 4291B Impedance/Material Analyzer. It was observed that the composition of 30 wt% NZF gave the highest dielectric constant in the frequency range of 1 MHz to 1.8 GHz at room temperature.

Downloads

Published

14-06-2026